- Smooth rolling center and micro tread shoulders - Directional water evacuating lines keep you upright - ISO: 507 - Bead: Wire - Weight: 771g
$17.00 - $28.00
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.
The latest generation of the World-Cup-proven intermediate tire, the Butcher BLCK DMND 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and provide additional biting edges. This in turn improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed, keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible—the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Casing: Center Overlap, Flip Up and Rubber Apex - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.3", psi 25-50 - 29 x 2.6", psi 20-40
The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside. The center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. - Casing: Additional bead to bead protection for exceptional durability plus sidewall stiffness stability - Compound: GRIPTON - Pressure: 25 – 50psi - Folding bead - 2Bliss Ready
The Eliminator features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between the center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the bite needed to stay in control on the trail with neutral handling on fire roads. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch-flat protection. In order to descend all-out, you need as much traction as possible. The tire needs to conform and hold on to the ground, but it also needs to protect against pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base serves up stability and support for better steering inputs. It also features our own GRIPTON compound that maximizes mechanical grip, damps vibration, and offers unparalleled traction in either wet or dry conditions. - Casing: Center Overlap, Flip Up and Rubber Apex - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.3", psi 25-50 - 29 x 2.6", psi 20-40
The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.
Specialized's Purgatory 2Bliss Ready tire is the standard bearer for trail tire performance. By applying FE Analysis to the Purgatory, they've optimized the tread to bite hard in loose corners, while legendary GRIPTON compound results in a faster, grippier tire for any all mountain excursion. Of course, the 2Bliss Ready design is the icing on the cake, allowing you to run lower tire pressures and all but eliminate the risk of pinch flats. - Casing: 60 TPI - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 29 x 2.3" PSI 25-50; approximate weight 770g
Specialized's Purgatory GRID tire is the standard bearer for trail tire performance. By applying FE Analysis and our GRIPTON compound to the Purgatory, they've optimized this tread to be fast rolling and to bite hard on loose terrain. Meanwhile, the GRID casing provides the utmost in cut and flat protection at the sidewalls, And of course, the 2Bliss Ready design is the icing on the cake, allowing you to run lower tire pressures and all but eliminate the risk of pinch flats. - Casing: Additional sidewall protection for exceptional durability, plus sidewall stiffness for stability. - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
The S-Works Fast Trak has become synonymous with fast and lightweight tires that are able to handle the most technical courses in the most grueling conditions. The block pattern is carefully arranged for fast rolling abilities and superb traction, while the blocks have been optimized to adapt to slippery surfaces with enough bite for loose ground. And now, it also features our own GRIPTON compound that maximizes mechanical grip, damps vibration, and offers unparalleled traction in either wet or dry conditions. How? Our GRIPTON compound recipe filters low and high frequencies, keeping your tires planted and you in control. - Casing: 120 TPI - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.1", psi 25-50, approximate weight 550g - 29 x 2.3", psi 25-50, approximate weight 595g
$8.00 - $18.00
Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.
Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.
Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve
We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.
We're not afraid to say that our GRIPTON compound is the best out there. And when combined with an ultra-supple 320 TPI cotton casing, you get a tire that's very special—you get the Turbo Cotton tire. Both materials stand for master craftsmanship, and they work in harmony to reflect our dedication to building the world's fastest tires. By bringing both of these materials together, we've created the best clincher tire out there. It provides a clear-cut performance advantage. - Casing: 320 TPI Polycotton - Bead: Foldable - Compound: GRIPTON - Flat Protection: BlackBelt - 700 x 24mm, psi 115-125, approximate weight 220g - 700 x 26mm, psi 95-115, approximate weight 240g - 700 x 28mm, Hell of the North, psi 85-95, approximate weight 260g
- Specifically developed for the rear wheel, but will make a good front tire too - Very fast and versatile XC tread - Great traction - Excellent acceleration - Outstanding rolling properties - Addix Speed Compound: Speed, stability, and durability
$7.99 - $20.89
Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients
$6.99 - $19.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Page 1 of 1